Avontek

HMI Articles

This category collects HMI articles for customers developing human-machine interface products, touch display devices, industrial panels, equipment interfaces, and control terminals. Articles here connect display and touch requirements with Android SBC, Linux SBC, custom board design, interface planning, BSP support, and production preparation.

HMI projects usually go wrong at the boundary between screen, touch, enclosure, and software behavior. A practical review starts with the panel datasheet, touch controller, cable route, boot display, service ports, and the environment where operators will use the device.

HMI hardware and touch display topics

HMI projects usually start from a display and touch requirement, but board selection also depends on OS direction, interface count, enclosure, installation environment, application workflow, and production testing. These articles focus on HMI hardware choices for product teams building real devices.

  • How to decide between Android HMI boards and Linux HMI boards based on UI, service behavior, app workflow, and field operation needs.
  • What display and touch integration can include, such as LVDS, MIPI, RGB, HDMI, touch controller support, backlight, camera, audio, Ethernet, USB, UART, and GPIO.
  • How industrial HMI requirements change board selection when the product needs reliable I/O, control interfaces, or long-running operation.
  • When an HMI project should use a standard SBC, a custom SBC, or a complete smart control panel product.

For HMI hardware with a rich touchscreen UI, compare Android SBC options. For control-oriented HMI products, review Linux SBC and Industrial SBC. If display, enclosure, mounting, or connector requirements are fixed by the final product, a Custom SBC may be needed; complete wall panels can start from Smart Control Panels.

Articles in this category

Read the HMI articles below for notes on display and touch integration, Android or Linux board choice, industrial interfaces, enclosure constraints, and production-ready HMI hardware.

Industrial HMI Interface Planning: Ethernet, RS485, CAN, GPIO, Touch, and Production Testing Industrial HMI Interface Planning: Ethernet, RS485, CAN, GPIO, Touch, and Production Testing How to plan industrial HMI interfaces and production testing, including Ethernet, RS485, CAN, GPIO, display, touch, power, enclosure, BSP, and field reliability. HMI Industrial Control Interface Planning Android HMI Board vs Linux HMI Board: Which Fits Your Product? Android HMI Board vs Linux HMI Board: Which Fits Your Product? A practical comparison of Android HMI boards and Linux HMI boards for touchscreen products, operator terminals, control panels, and embedded interfaces. HMI Android SBC Linux SBC HMI SBC Selection Guide for Touchscreen Operator Terminals HMI SBC Selection Guide for Touchscreen Operator Terminals A practical HMI SBC selection guide for touchscreen operator terminals, covering display, touch, Android or Linux, interfaces, enclosure fit, testing, and production. HMI HMI SBC Touch Display HMI Board Design for Touch Display Products HMI Board Design for Touch Display Products Important HMI board design considerations for touch display products, including display interface, touch integration, operating system, enclosure, and production testing. HMI Android SBC Linux SBC

Planning your HMI project?

Send your application, target SoC, operating system, display, I/O, wireless, quantity, and timing notes. Avontek can review the board path and next steps.

Request a Quote